P-V / P-VS
- V-Mount™ Mounting Plates
 
This plate is used to mount the ENDURA
E-10/E-10S/E-7/E-7S/E-80/E-80S/E-50/E-50S
V-Mount batteries on cameras who currently
support mounting systems other than
V-Mount. The IDX P-V/P-VS V-Mount
plate can be fitted to cameras of
any manufacturer, using different
battery mounting systems. In addition,
the IDX V-Mount plate features a D-Tap
2 Pin DC out connector for powering
on board lights and Digi-View, which
shows the battery capacity in the
viewfinder. There are two versions
of the V-Mount Plate, one with SYNCRON*
(P-VS) and one without (P-V).
*Syncron is an energy saving function
which activates on-camera lights when
recording is engaged and deactivates
when the recording is paused. Please
check your camera model for compatibility.
Top
|
A-E2DT
- V-Mount™ Camera Adapter with
2-pin Power Tap
 
esigned to provide V-Mount compatible
cameras with a 2-pin Power Tap connector
for use with on-board lights. Some
camera models do not support a DC
output for use of on-board lights,
assist monitors and other support
equipment. Others do but may be located
in an inconvenient place or do not
output enough voltage. Used between
the camera head and ENDURA battery.
Supports ALL V-Mount compatible cameras.
Top |
A-E2F900 - V-Mount™
Camera Adapter with 2-pin Power Tap
Specifically designed for the Sony®
F900 to provide a 50W 2-pin Power Tap
connector for use with on-board lights,
video assist monitors and other support
equipment. Used between the camera head
and ENDURA battery.
Top
|
| A-LWR
- Wireless Receiver Mounting Bracket
  This
L-shaped mounting plate gives users
the option to easily mount a wireless
receiver to the side of an ENDURA
System battery. This bracket mounts
between our P-V or P-VS V-Mount Adaptor
Plate and camera.
Top
|
| A-EWR
- Wireless Receiver Mounting Bracket
  This
plate provides a surface on which
to mount a wireless receiver directly
on the back of an ENDURA E-10/E-80
or E-7/E-50 PowerLink battery.
Top
|
| A-SWR
- Wireless Receiver Mounting Bracket
  This
mounting bracket provides a rear-mount
for a wireless receiver on Sony brand
cameras. Adjustable for ENDURA System
PowerLink batteries. Available with
flush-mount or stud-mounts.
Top
|
| A-UWR
- Universal Rear-mount Wireless Receiver
Mounting Bracket
 This
new mounting bracket provides a rear-mount
for a wireless receiver on cameras
using an IDX P-V or P-VS V-Mount mounting
plate. Adjustable for ENDURA System
PowerLink batteries.
Top
|
A-E2NP - NP-style
to ENDURA Charging Adaptor
  The
A-E2NP holder is an adaptor that will
allow users to charge IDX NP type
batteries on ENDURA V-Mount chargers.
Top |
C-NP2E - Interface
Cable
 The
C-NP2E Cable interface allows ENDURA
batteries to be charged on existing
IDX Li-Ion NP chargers. 
Top |
| EB-2
- ENDURA Power Base Station
 
ENDURA dual battery power base station
supports up to four ENDURA PowerLink
batteries allowing up to 392Wh of
power. Features uninterrupted battery
changeover, low voltage warning lamp
and extendable support feet. One 10'
XLR power cable included.
Top
|
| EB-4
- ENDURA Power Base Station
 
ENDURA quad battery power base station
supports up to eight ENDURA PowerLink
batteries allowing up to 784Wh of
power. Features uninterrupted battery
changeover, low voltage warning lamp
and extendable support feet. One 10'
XLR power cable included.
Top
|
| C-EB
(XLR) - ENDURA Power Adaptors/Cables
These adaptors and cables provide
a universal power source for other
equipment such as portable audio mixers,
DAT and voice recorders.
Top
|
| SD-1E
- ENDURA Universal DV Camera Power
Adaptor
The SD-1E is a small, lightweight
V-Mount bracket which can be attached
to any user supplied standard or wide
waist belt. The unit will support
up to two ENDURA batteries and offers
user-selected 7.2V or 12V output to
the camera. A perfect solution for
DV cameras and professionals in using
one battery system for all types of
cameras.
**
Belt not included.
|
| A-E2XL1
- DV Camera Power Adaptor
 
A-E2XL1 adaptor plate was developed
to use ENDURA System batteries with
the Canon DV Camera model XL-1/XL-1S/XL-2/GL-1.
When using the optional accessory
O-LWP, a wireless receiver can be
attached.
Top |
| A-E2DVC15
- DV Camera Power Adaptor
 
A-E2DVC15 was developed to use ENDURA
System batteries with the Panasonic
DV Camera model AG-DVC15. With using
the optional accessory O-LWP, a wireless
receiver can be attached.
Top |
| O-LWP
- DV Camera Wireless Receiver Mounting
Bracket
O-LWP wireless adaptor plate allows
the mounting of wireless receivers
to the side of A-E2XL1 and A-E2DVC15.
Available with flush-mount or stud-mount.
Top |
| A-AB2E
- 3-stud to ENDURA V-Mount Adaptor
 Temporary
"3-stud" mount to "V-Mount"
converter plate. This plate slides
onto 3-stud mounting brackets, allowing
ENDURA batteries to be used. This
plate temporarily eliminates Digi-View
and Syncron.
|
