Miniature : 4062-FM Miniature Omnidirectional Microphone, XLo-Sens, Beige The Type 4062-F is the beige version of the Miniature Microphone Type 4062. This type is a prepolarised omnidirectional Miniature Condenser Microphone with a 5.4 mm vertical diaphragm specially designed for maximum performance under the often difficult conditions when mounted directly on the human body. The utmost attention has been paid to the microphone's resistance to humidity. A double vent protection system together with water resistant materials inside the microphone make it more than difficult for moisture to cause the Miniature Microphone to fail. By changing the protection grids, the Miniature Microphones can furthermore be acoustically modified according to the placement of the microphone on the body. Type 4062 is acoustically identical with the award winning Type 4060, but the sensitivity is adjusted to 1 mV/Pa to match some of the more sensitive transmitters on the market. The noise floor of the Type 4062 is 33 dB(A) re. 20 µPa and if powered correctly the microphone will be able to handle sound pressure levels up to 154 dB SPL before clipping occurs. A wide range of connection adapters makes it possible to use Type 4062 with close to any professional wireless system available plus 48 V phantom.   Specification Principle of operation: Pressure Cartridge type: Pre-polarised condenser element with vertical diaphragm Frequency range, ± 2 dB: Soft boost grid: 20 Hz - 20 kHz ±2 dB, 3 dB soft boost at 8 - 20 kHz High boost grid: 20 Hz - 20 kHz ±2 dB, 10 dB boost at 12 kHz Directional characteristics: Omnidirectional Equivalent noise level A-weighted: Typ. 33 dB(A) re. 20 µPa (max. 37 dB(A)) Sensitivity, nominal, ±2 dB: Nominally 1 mV/Pa ±3 dB at 1 kHz Equiv. noise level ITU-R BS.468-4: Typ. 45 dB (max. 49 dB) Total harmonic distortion (THD): 143 dB SPL peak (<1% THD) Preamplifier frequency range: 20 Hz to 50 kHz (+0 dB/-3 dB) Output impedance: 30 - 40 Ohm Cable drive capability: Up to 300 m (984 ft) Microphone length: 12.7 mm (0.5 in) Max. SPL, peak before clipping: 154 dB SPL before clipping Weight: <7.5 g (0.26 oz) incl. cable and MicroDot connector Cable length: 1.8 m (5.9 ft)

Back | Print This Page