Compact : 4052 Compact Omnidirectional Microphone, Rear Cable The Type 4052 is an omnidirectional phantom powered (P48) condenser microphone using the same type of cartridge as the famous Type 4006, but is preamplified using a build-in ultra-small thick-film mounted FET-preamplifier, which enables the cartridge to be mounted on a extremely compact microphone housing. The 4052 has its cable mounted behind the microphone axis for situations where the microphone needs to be suspended from its own cable. The linear on-axis frequency response from 20 Hz to 20 kHz (±2 dB) together with the ultra-small design makes Type 4052 the perfect choice for all kinds of on-camera or on-stage use where high definition audio is of high priority. These Compact Omnis are extremely popular as A-B Stereo pairs in concert halls where the beautiful architecture has to go hand in hand with quality recordings.   Specification Principle of operation: Pressure Cartridge type: Pre-polarised condenser Type MM0042 Frequency range, ± 2 dB: On-axis: 20 Hz - 20 kHz ±2 dB Directional characteristics: Omnidirectional Equivalent noise level A-weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A)) Sensitivity, nominal, ±2 dB: Nominally 30 mV/Pa (at 250 Hz) Equiv. noise level ITU-R BS.468-4: Typ. 27 dB (max. 29 dB) Total harmonic distortion (THD): 125 dB SPL peak (<0.5 % THD) Output impedance: <300 Ohm Cable drive capability: Up to 100 m (328 ft) Microphone length: 19 mm (0.75 in); 38 mm (1.5 in) (incl. cable relief) Max. SPL, peak before clipping: 135 dB SPL peak Weight: 20 g (0.71 oz) (without cable)

Back | Print This Page