Large Diaphragm

Standard

Compact

Miniature

Headband

Adapter

Reference

Hydrophone

WINDPAC

Amplifier

Large Diaphragm : 4041 - T2

Large Diaphragm Microphone, Tube, 130 V

4041-T2The DPA 4041-T2 is an omnidirectional microphone that uses the 24 mm (1 in) Modular Microphone Cartridge MMC4041 with the MMP4000-T2 Tube Preamplifier which offers a slight musical coloration of the recording. The cartridge MMC4041 can be unscrewed from the preamplifier which allows for the exchange of the preamplifier module. The frequency response from 10 Hz to 20 kHz with a 4-6 dB soft boost around 8 kHz matches the response of the highly acclaimed DPA 4040 Hybrid Microphone. The 4041-T2 is powered via the standard HMA5000 Microphone Amplifier (not included with the 4041-S), a microphone system that offers a totally transformerless audio path with an exceptionally low noise floor of maximum 10 dB(A) and a SPL handling capability of 144 dB SPL peak.

 

Specification
Principle of operation:
Pressure gradient
Cartridge type:
24 mm (1 in) condenser w. stainless steel diaphragm
Power supply:
130 V via HMA5000
Frequency range, ± 2 dB:
10 Hz - 20 kHz with 4 - 6 dB soft boost at 8 kHz
Directional characteristics:
Omnidirectional
Equivalent noise level A-weighted:
Typ. 9 dB(A) re. 20 µPa
Sensitivity, nominal, ±2 dB:
85 mV/Pa; -22 dB re. 1 V/Pa
Equiv. noise level ITU-R BS.468-4:
Max. 22 dB
Total harmonic distortion (THD):
<0.5% THD up to 120 dB SPL peak
<1% up to 126 dB SPL peak
Preamplifier frequency range:
20 Hz to 50 kHz (±0.2 dB)
Output impedance:
Matches HMA5000 input
Cable drive capability:
From microphone to HMA5000; Up to 20 m (66 ft). From HMA5000: Up to 300 m (984 ft)
Microphone length:
170 mm (6.69 in)
Max. SPL, peak before clipping:
144 dB
Weight:
190 g (6.7 oz)
Dynamic Range:
Typ. 117 dB
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):
85 dB(A)
Connector:
7-pin modified XLR-M (High Voltage)

 


Back | Print This Page