|  The
Type 4041-SP is designed to work in a standard
48 V phantom power environment. Since the
capsule is the same as for the high voltage
alternative 4041-S, the 4041-SP offers the
same superior sound quality, with very slight
changes in the specifications.
The cartridge MMC4041 can be unscrewed from
the preamplifier which allows for the exchange
of the preamplifier module. It is therefore
always possible to upgrade to the high voltage
preamplifier, also using the DPA mic amp
HMA5000.
The frequency response has a 4-6 dB soft
lift around 8 kHz and matches the response
of the legendary Type 4040 Hybrid Microphone.
This microphone offers a totally transparent
audio path with an exceptionally low noise
floor of maximum 8 dB(A) and a SPL handling
capability of 134 dB SPL peak.
|
| Specification |
|
Principle
of operation:
Pressure
Cartridge
type:
24 mm (1 in) condenser with stainless steel diaphragm
Power
supply:
48 V Phantom power
Frequency
range, ± 2 dB:
20Hz - 20kHz with 4 - 6 dB soft boost at 8 kHz
Directional
characteristics:
Omnidirectional
Equivalent
noise level A-weighted:
Max. 8 dB(A) re. 20 µPa
Sensitivity,
nominal, ±2 dB:
70 mV/Pa; -26 dB re. 1 V/Pa
Equiv.
noise level ITU-R BS.468-4:
Max 20 dB
Total
harmonic distortion (THD):
<0.5% THD up to 120 dB SPL peak
<1% THD up to 126 dB SPL peak
|
Preamplifier
frequency range:
20 Hz- 50 KHz ±˝ dB
Output
impedance:
<200 Ohm
Cable
drive capability:
Up to 100 m (328 ft)
Microphone
length:
170 mm (6.69 in)
Max.
SPL, peak before clipping:
134 dB
Weight:
190 g (6.7 oz)
Dynamic
Range:
Typ. 118 dB
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):
86 dB(A)
Connector:
3-pin XLR-M (Standard P48)
|
|
