Large Diaphragm : 4041 - S Large Diaphragm Microphone, Solid State, 130 V The 4041-S is an omnidirectional microphone that uses the Large Diaphragm Capsule MMC4041 with the totally transparent MMP4000-S Solid State Preamplifier. The cartridge MMC4041 can be unscrewed from the preamplifier which allows for the exchange of the preamplifier module. The frequency response from 10 Hz to 20 kHz with a 4-6 dB soft boost around 8 kHz matches the response of the highly acclaimed Type 4040 Hybrid Microphone. The 4041-S is powered via the standard HMA5000 High-Voltage Microphone Amplifier (not included with the 4041-S), a microphone system that offers a totally transparent audio path with an exceptionally low noise floor of maximum 7 dB(A) and a SPL handling capability of 144 dB SPL peak. Specification Principle of operation: Pressure Cartridge type: 24 mm (1 in) condenser w. stainless steel diaphragm Power supply: 130 V via HMA5000 Frequency range, ± 2 dB: 10Hz - 20kHz with 4 - 6dB soft boost at 8 kHz Directional characteristics: Omni Equivalent noise level A-weighted: Max. 7dB(A) re. 20 µPa Sensitivity, nominal, ±2 dB: 90 mV/Pa;-21 dB re. 1 V/Pa Equiv. noise level ITU-R BS.468-4: Max. 19 dB Capsule diameter: 24 mm (1 in) Total harmonic distortion (THD): <0.5% THD up to 120 dB SPL peak <1% up to 126 dB SPL peak Preamplifier frequency range: 3 Hz to 40 kHz (+0dB/-1dB) Output impedance: Matches HMA5000 input Cable drive capability: From microphone to HMA5000: Up to 20 m (66 ft). From Hma5000: Up to 300 m (984 ft) Microphone length: 170 mm (6.7 in) Max. SPL, peak before clipping: 144 dB Weight: 190 g (6.7 oz) Dynamic Range: Typ. 119 dB S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 87 dB Connector: 7-pin modified XLR-M (High Voltage)

Back | Print This Page