 The
Type 4027 is a phantom powered (P48) compact
condenser microphone using the same type
of cartridge as the 4015 wide cardioid microphone,
but is preamplified using a build-in ultra-small
thick-film mounted FET-preamplifier.
The 4027 has its cable (3 m as standard)
side-mounted, which mechanically is perfect
for situations where the microphone needs
to be mounted directly on the musical instrument
or on a stand.
The linear frequency response together with
the nice and subtle high frequency lift
give that brilliant sparkle of purity, which
will bring your sound to a higher level.
The ultra-small design makes Type 4027 the
perfect choice whenever high definition
audio and insignificant size is paramount.
With unbelievable depth and precision, the
DPA Compact wide cardioids will exceed your
expectations on choirs, percussion, grand
pianos, reed and brass instruments and much
more.
Specification
|
|
Principle
of operation:
Pressure
gradient
Cartridge
type:
19 mm (0.75 in) pre-polarised condenser
Power
supply:
48 V Phantom power
Frequency
range, ± 2 dB:
On-axis: 40 Hz to 20 kHz
Directional
characteristics:
Wide Cardioid
Equivalent
noise level A-weighted:
Typ. 20 dB(A) re. 20 µPa
Sensitivity,
nominal, ±2 dB:
7 mV/Pa; -43 dB re. 1 V/Pa
Equiv.
noise level ITU-R BS.468-4:
Typ. 25 dB (max. 28 dB)
Capsule
diameter:
19 mm
|
Total
harmonic distortion (THD):
<0.5 % THD up
to 110 dB SPL peak
1% THD up to 116 dB SPL peak
Output
impedance:
<300 Ohm
Cable
drive capability:
Up to 100 m
Microphone
length:
31 mm
Max.
SPL, peak before clipping:
145 dB
Weight:
27.5 g (without cable)
Operating
temperature range:
-10 to +55 °C (+14 to 131 °F)
Dynamic
Range:
Typ. 96 dB
S/N
ratio, re. 1 kHz at 1 Pa (94 dB SPL):
74 dB(A)
Connector:
3-pin XLR-M (Standard P48) |
|
