 The
DPA 4026 is a phantom powered (P48) compact
condenser microphone using the same type
of cartridge as the 4015 wide cardioid microphone,
but is preamplified using a build-in ultra-small
thick-film mounted FET-preamplifier.
The 4026 has its cable (3 m as standard)
rear-mounted, for situations where the microphone
needs to be suspended from its own cable
or mounted on a stand.
The linear frequency response together with
the nice and subtle high frequency lift
give that brilliant sparkle of purity, which
will bring your sound to a higher level.
The ultra-small design makes Type 4026 the
perfect choice whenever high definition
audio and insignificant size is paramount.
With unbelievable depth and precision, the
DPA Compact wide cardioids will exceed your
expectations on choirs, percussion, grand
pianos, reed and brass instruments and much
more.
| Specification |
|
Principle of operation:
Pressure gradient
Cartridge type:
19 mm (0.75 in) pre-polarised condenser
Power supply:
48 V Phantom power
Frequency range, ± 2 dB:
On-axis: 40 Hz to 20 kHz
Directional characteristics:
Wide Cardioid
Equivalent noise level A-weighted:
Typ. 20 dB(A) re. 20 µPa
Sensitivity, nominal, ±2 dB:
7 mV/Pa; -43 dB re. 1 V/Pa
Equiv. noise level ITU-R BS.468-4:
Typ. 25 dB (max. 28 dB)
Capsule diameter:
19 mm
|
Total harmonic
distortion (THD):
<0.5 % THD up to 110 dB SPL peak
1% THD up to 116 dB SPL peak
Output impedance:
<300 Ohm
Cable drive capability:
Up to 100 m (328 ft)
Microphone length:
35 mm; 52 mm incl. cable relief
Max. SPL, peak before clipping:
145 dB SPL peak
Weight:
30 g (without cable)
Operating temperature range:
-10 to +55 °C (+14 to 131 °F)
Dynamic Range:
Typ. 96 dB
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):
74 dB(A)
Connector:
3-pin XLR-M (Standard P48)
|
|
