 The
3532-SP is a complete state-of-the-art A-B
Stereo Kit with two 4041-SP microphones,
carefully matched within 1dB on both frequency
response, sensitivity and self-noise. It
is the ultimate choice for the demanding
engineer and audio purist who emphasises
clarity, openness, precision, low self-noise
and high sensitivity.
The kit is designed for a broad range of
uses, like as main pair for classical, jazz
and folk genres, grand pianos, guitars,
overheads or close-miking drums, choirs,
strings, wind instruments and much more.
You get a bright and transparent sound quality
with lots of headroom. With its on-axis
soft boost, the 4041-SP omni microphone
can be angled to use as a natural equalizer.
Besides the paired microphones, the briefcase
contain a stereo boom, holders and windscreens.
| Specification |
|
Principle of operation:
Pressure
Cartridge
type:
24 mm (1 in) condenser w. stainless
steel
diaphragm
Power supply:
48 V Phantom power
Frequency
range, ± 2 dB:
20 Hz - 20 kHz with 4 - 6 dB soft
boost at 8 kHz
Directional
characteristics:
Omnidirectional
Equivalent
noise level A-weighted:
Max. 8 dB(A) re. 20 µPa
Sensitivity,
nominal, ±2 dB:
50 mV/Pa: -26 dB re. 1 V/Pa
Equiv. noise
level ITU-R BS.468-4:
Max 20 dB
Capsule diameter:
24 mm (1 in)
|
Total harmonic
distortion (THD):
<0.5% up to 120 dB SPL peak
<1% up to 126 dB SPL peak
Preamplifier frequency range:
20 Hz- 50 KHz ±0.5 dB
Output impedance:
<200 Ohm
Cable drive capability:
Up to 100 m (328 ft)
Microphone length:
170 mm (6.69 in)
Max. SPL, peak before clipping:
134 dB
Weight:
190 g (6.7 oz)
Dynamic Range:
Typ. 118 dB
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):
86 dB
Connector:
3-pin XLR-M (Standard P48) |
|
